Multifunction Cable Test, Qualification and Certification Testers
High-Performance Multifunction Cable Testers for Network Installation Success.
Accurately test, troubleshoot, and certify every cable type with a single tester set.
Ensure every installation meets industry standards and client requirements with total confidence.
Interchangeable Dual-Control Full Screen Testers.
While competitors force you to use a specific unit as the "Main," the TestPro allows you to swap handsets interchangeably, ensuring your team stays productive regardless of which unit is in their hand.
Our solution eliminates the traditional "Main and Remote" hardware constraint. Both units are identical, full-featured handsets equipped with high-resolution touchscreens.
Through the software, any unit can act as the Local or Remote, allowing them to be swapped interchangeably.
- Instant Diagnostics at Both Ends of the Link
- Bidirectional Control: Start, stop, and save tests from either handset
- Instant Results: View full pass/fail data and diagnostic traces on both screens simultaneously
- Dual Operation: Each unit can function independently for active network discovery or PoE testing
Interchangeable Dual-Control Full Screen Testers.
Fastest CAT6 certification test in the world.
Fastest CAT6 certification test in the world.
Our multifunction tester offers the fastest Cat6a certification in the industry. This drastically reduces the time your technicians spend on-site, allowing you to finish projects faster and more profitably.
- 6-second Cat6a Autotest completion.
- Instant pass/fail visual indicators.
- Simultaneous testing of multiple parameters.
- High-speed data logging and storage.
Tier 1 and 2 Fiber Optic Certification.
This capability provides dual-wavelength Tier 1 certification for both Multimode and Singlemode fiber. Through optional adapters, it supports Tier 2 OTDR troubleshooting and fiber end-face inspection to ensure complete optical link integrity.
- Tier 1 Certification: Measures loss, length, and polarity for multimode (850/1300nm) and singlemode (1310/1550nm)
- Tier 2 OTDR (Optional): Pinpoints the exact distance to broken fiber or high-loss events
- Visual Fault Locator (VFL): Built-in light source for quick visual identification of fiber breaks or bends
- Hybrid Fiber Testing: Measures electrical voltage and resistance for powered fiber systems
- End-Face Inspection: Digital probe support to check connector cleanliness against IEC 61300-3-35 standards.
- Dual-Ended Testing: Main and Remote units provide full visibility and control from both ends of the fiber link
Tier 1 and 2 Fiber Optic Certification.
Multi-Gigabit Link Speed Testing Capability.
Multi-Gigabit Link Speed Testing Capability.
Signal-to-Noise Ratio (SNR) Based Validation Description: Rather than simple continuity tests, this capability validates the link's ability to support actual data rates (1G/2.5G/5G/10G) under real-world conditions.
It evaluates the impact of noise and interference while the link is under traffic and PoE load.
- SNR Measurement: Provides objective pass/fail assessment of link performance at 1 / 2.5 / 5 / 10GBASE-T
- Loaded Testing: Validates link quality while simultaneously applying PoE and network traffic
- Bit Error Rate (BER) Testing: Ensures data integrity by verifying transmission quality.
- NBASE-T Support: Optimized for verifying 2.5G and 5G backbones required for modern wireless Access Points
- Infrastructure Readiness: Confirms if existing older-category cabling can support higher multi-gigabit speeds
Power Over Ethernet (PoE) Load Testing and Validation.
TruePower™ Load Testing (up to 90W). The PoE validation suite ensures that Power Source Equipment (PSE), such as switches, can deliver the required wattage to the Powered Device (PD) location. It performs hardware-based load testing to identify voltage drops and power fluctuations
- Full Standard Support: Validates 802.3af/at/bt (Type 1-4) and UPoE standards
- TruePower™ Loading: Simulates actual device loads up to 90W (Class 8) at the jack
- PSE Configuration: Reports the available power class, voltage, and pair usage from the switch
- Sustained Load Monitoring: Tracks power stability over extended periods to catch intermittent drops
- Voltage Drop Analysis: Measures real-time voltage and current under load to verify cable resistance suitability
Power Over Ethernet (PoE) Load Testing and Validation.
Modular Versatility with hot-swappable adapters.
Modular Versatility with hot-swappable adapters.
The TestPro is a future-proof investment thanks to its hot-swappable adapters. You can switch from copper testing to fiber testing or Multi-Gigabit Ethernet testing in seconds using the same handheld unit.
- Unified Test Engine: A single main unit supports Copper, Fiber, PoE, and Multi-Gigabit testing
- Hot-Swappable Adapters: Switch between test types in seconds without needing to reboot or recalibrate the main chassis
- Incremental Upgrades: Start with a basic copper kit and buy individual fiber or PoE adapters only when your projects require them
- Future-Proof Hardware: New technologies (like Single Pair Ethernet) are supported via new adapters, keeping your main investment relevant for years
- Standardized User Interface: One learning curve—once your team knows how to use the CV100, they can operate every adapter type effortlessly
- Field-Replaceable Modules: If a connector wears out, you only replace the specific adapter, not the entire expensive testing unit.
Test Data Management and Cloud Platform.
Our multifunction tester is more than just a handheld tool; it is backed by a robust software ecosystem that allows you to manage, categorize, and archive your test results with professional precision. This platform ensures that your data is organized, accessible, and ready for client handover at a moment's notice.
- Cloud Sync: Instant upload of test results from the handheld unit to a secure cloud account.
- Collaborative Access: Allow multiple stakeholders to view project progress and data
- Custom Labeling: Pre-configure cable labeling schemes in the software and push them to the tester to ensure on-site consistency.
- In-Depth Analysis: View detailed "Return Loss" and "Crosstalk" plots on a large screen for advanced troubleshooting.
- Because AEM’s 6-second autotest captures all parameters by default—including DC Resistance Unbalance, TCL, and ELTCTL, TestDataPro enables instant software-based recertification without field retesting. For example Cat/Cat6 test can be recertified to Cat6A, or Cat6A recertification to ISO/IEC Class EA
Test Data Management and Cloud Platform.
Key Features and Highlights
- Project-Based Categorization: Easily organize test results by specific project names, building levels, or client sites. This prevents data overlap and makes it simple to retrieve results for specific areas of an installation.
- TestPro Cloud Connectivity: Sync results directly from the field to the cloud via Wi-Fi. Project managers can view live progress and analyze results from the office while technicians are still on-site.
- Professional PDF Reporting: Generate comprehensive, industry-standard certification reports. These "birth certificates" include detailed graphs and pass/fail data that provide the official proof of quality your clients require.
- Bulk Data Management: Use the desktop software to rename, move, or re-categorize thousands of test results simultaneously, saving hours of manual data entry.
Frequently Asked Questions
1. Does the system include two full-screen testers?
Yes. Unlike traditional testers that have a “dumb” remote with only basic LED indicators, the AEM TestPro features two identical, full-color touchscreen units (Main and Remote).
This allows technicians at either end of the cable to start a test, view detailed graphical results, and save data, significantly increasing on-site efficiency.
2. Can I connect multiple remote devices to one main unit?
Yes. The system is designed for high-volume environments. You can pair one Main unit with multiple Remote units.
This is particularly useful for testing different zones of a building simultaneously or switching between different media types (e.g., copper and fiber) without having to re-pair devices constantly.
3. Do copper and fiber testing require different kits, or is the tester compatible with any adapter?
The TestPro is a modular platform. You do not need different base units for copper and fiber. Both units feature hot-swappable adapter slots. You can simply swap out a Cat6A copper adapter for a Tier 1 or Tier 2 fiber optic adapter. One pair of testers is compatible with the entire range of AEM test adapters, making it a truly multifunction investment.
4. How fast is the "6-Second Autotest" and what does it include?
The 6-second autotest is the fastest in the industry for Cat6A certification. Within those six seconds, the device performs a full suite of tests, including Wiremap, Length, Delay, DC Resistance Unbalance, and all crosstalk (NEXT) and Return Loss measurements.
5. Can this tester certify cables longer than the standard 100 meters?
Yes. While standard Ethernet is limited to 100m, the TestPro can test and certify cables as long as 1,000 meters (1km). It uses specialized “Long Cable” settings and custom test limits, measuring RF performance down to 100 kHz to ensure accuracy over extreme distances.
6. Does it support Power over Ethernet (PoE) load testing?
Absolutely. The TestPro CV100 is unique because it doesn’t just check if PoE is present; it performs a 90W Load Test (802.3bt). It validates that the cabling can actually deliver the required power without signal degradation, which is essential for modern PTZ cameras and Wi-Fi 6 access points.
7. How do I manage and share the test results?
Results can be synced via Wi-Fi to the TestPro Cloud or exported via USB. The integrated software allows you to categorize results by project, floor, or client. You can then generate professional, customized PDF “birth certificates” for your infrastructure to provide to your customers.
8. Is the tester future-proof for higher speeds?
Yes. The platform supports testing up to 3000 MHz, which covers current Cat6A standards and extends all the way to Cat8.1 and Cat8.2, as well as Multi-Gigabit Ethernet (2.5G, 5G, 10G) and Single Pair Ethernet (SPE).
CONTACT US
CONTACT US
Precision Testing Meets Smart Data Management.
Why settle for basic connectivity when you can have certified performance?
Equip your team with the AEM TestPro CV100 to eliminate guesswork, certify links in seconds, and manage every project result seamlessly through our integrated cloud platform.
